Arduino UNO R4 WiFi – Mikrocontroller-Board mit WLAN und LED-Matrix
Datenstand 07.10.2026 · GTIN 7630049204591 · MPN ABX00087Korrektur melden

Was wir wissen
Laut Herstellerdatenblatt: Prozessor Renesas RA4M1 (Arm Cortex-M4, 48 MHz); ESP32-S3 als Funk-Koprozessor, Arbeitsspeicher 256 KB Flash, 32 KB SRAM, Anschlüsse USB-C, Hohlbuchse, Qwiic (I²C), ICSP, 14 digitale I/O (6 PWM), 6 analoge Eingänge, Verbindung WLAN, Bluetooth, USB.
Angaben aus dem Herstellerdatenblatt, von uns nicht geprüft. Sobald wir das Gerät testen, steht hier unser Urteil.
Angebote
- AmazonLieferbar · Stand 07.10.2026, 09:0030,50 €Zum Shop
Beschreibung
Der Arduino UNO R4 WiFi ist die aktuelle Fassung des bekanntesten Mikrocontroller-Boards. Gegenüber dem UNO R3 hat er einen schnelleren 32-Bit-Prozessor, WLAN, Bluetooth und eine eingebaute LED-Matrix.
Kompatibel
Formfaktor, Pinbelegung und 5-Volt-Logik entsprechen dem UNO R3, sodass vorhandene Shields und Motortreiber weiter passen.
Im Roboter
Der UNO steuert Motoren, Servos und Sensoren mit exaktem Timing. Über WLAN lässt er sich per App oder vom Raspberry Pi aus fernsteuern.
Gut zu wissen
Bei Amazon verkauft Arduino selbst, mit Versand durch Amazon.
Günstigere Variante: Der UNO R4 Minima hat denselben Prozessor, aber kein WLAN und keine LED-Matrix.
Kein Linux. Für Kamera und KI braucht es zusätzlich einen Raspberry Pi oder Jetson.
Für wen eignet sich der Arduino UNO R4 WiFi?
Für Einsteiger und Maker, die Motoren und Sensoren ansteuern wollen – allein oder als Helfer eines größeren Rechners.
Technische Daten
Datenstand 07.10.2026Einordnung
- Marke
- Arduino
- Serie
- UNO
- Kategorie
- Controller & Einplatinenrechner
- Erscheinungsjahr
- 2023
- Kompatibel mit
- UNO-R3-Shields (Formfaktor und 5-V-Logik), Qwiic-Module
Programmieren & Steuerung
- Programmierbarkeit
- Text
- Steuerung
- Manuell am Gerät
- Schnittstellen
- WLAN, Bluetooth, USB
- Prozessor
- Renesas RA4M1 (Arm Cortex-M4, 48 MHz); ESP32-S3 als Funk-Koprozessor
- Arbeitsspeicher
- 256 KB Flash, 32 KB SRAM
- Anschlüsse
- USB-C, Hohlbuchse, Qwiic (I²C), ICSP, 14 digitale I/O (6 PWM), 6 analoge Eingänge
Energie
- Stromquelle
- Netzbetrieb
Maße & Material
- Maße (H × B × T)
- — × 5.334 × 6.885 cm
- Gewicht
- 0,048 kg
Weitere Angaben
- num_gpioCount
- 14
- txt_powerInput
- USB-C 5 V oder 6–24 V über Hohlbuchse/VIN
- txt_programmingLanguages
- C/C++ (Arduino IDE, Arduino Cloud)
Lieferumfang
Arduino UNO R4 WiFi
Im Vergleich
| Modell | Note | Prozessor | Arbeitsspeicher | Anschlüsse | Verbindung | Preis | |
|---|---|---|---|---|---|---|---|
| Arduino UNO R4 WiFi – Mikrocontroller-Board mit WLAN und LED-Matrixdiese Seite | n. g. | Renesas RA4M1 (Arm Cortex-M4, 48 MHz); ESP32-S3 als Funk-Koprozessor | 256 KB Flash, 32 KB SRAM | USB-C, Hohlbuchse, Qwiic (I²C), ICSP, 14 digitale I/O (6 PWM), 6 analoge Eingänge | WLAN, Bluetooth, USB | 30,50 € | Daten |
| Raspberry Pi Pico 2 W – Mikrocontroller-Board mit WLAN und Bluetooth | n. g. | Raspberry Pi RP2350: zwei Arm Cortex-M33 oder zwei RISC-V-Hazard3-Kerne mit 150 MHz | 520 KB SRAM, 4 MB Flash | Micro-USB (Strom/Daten), 40 Lötpads, SWD-Debug, BOOTSEL-Taste | WLAN, Bluetooth, USB | 8,52 € | Daten |
| Espressif ESP32-S3-DevKitC-1 – Entwicklungsboard mit WLAN und Bluetooth | n. g. | ESP32-S3: Xtensa LX7 Dual-Core, bis 240 MHz, mit Vektorbefehlen für KI | 512 KB SRAM, 8 MB PSRAM, 8 MB Flash | 2 × Micro-USB (UART-Brücke und native USB-OTG), 2 × 22-polige Stiftleisten, RGB-LED | WLAN, Bluetooth, USB | 22,94 € | Daten |
| BBC micro:bit V2 Go – Einplatinencomputer im Starter-Set | n. g. | — | — | — | Bluetooth, USB | 37,95 € | Daten |
| Raspberry Pi 3 Model B+ (1 GB) – Einplatinencomputer | n. g. | Broadcom BCM2837B0, 4 × ARM Cortex-A53, 64 Bit, 1,4 GHz | 1 GB LPDDR2; Massenspeicher über microSD-Karte (nicht enthalten) | 4 × USB 2.0, HDMI, 3,5-mm-AV-Klinke, CSI-Kamera, DSI-Display, microSD-Slot, 40-Pin-GPIO, Ethernet, Micro-USB (Strom) | WLAN, Bluetooth, Ethernet / LAN, USB | 49,94 € | Daten |
- n. g.Arduino UNO R4 WiFi – Mikrocontroller-Board mit WLAN und LED-Matrixdiese SeiteDatenProzessorRenesas RA4M1 (Arm Cortex-M4, 48 MHz); ESP32-S3 als Funk-KoprozessorArbeitsspeicher256 KB Flash, 32 KB SRAMAnschlüsseUSB-C, Hohlbuchse, Qwiic (I²C), ICSP, 14 digitale I/O (6 PWM), 6 analoge EingängeVerbindungWLAN, Bluetooth, USBPreis30,50 €
- n. g.Raspberry Pi Pico 2 W – Mikrocontroller-Board mit WLAN und BluetoothDatenProzessorRaspberry Pi RP2350: zwei Arm Cortex-M33 oder zwei RISC-V-Hazard3-Kerne mit 150 MHzArbeitsspeicher520 KB SRAM, 4 MB FlashAnschlüsseMicro-USB (Strom/Daten), 40 Lötpads, SWD-Debug, BOOTSEL-TasteVerbindungWLAN, Bluetooth, USBPreis8,52 €
- n. g.Espressif ESP32-S3-DevKitC-1 – Entwicklungsboard mit WLAN und BluetoothDatenProzessorESP32-S3: Xtensa LX7 Dual-Core, bis 240 MHz, mit Vektorbefehlen für KIArbeitsspeicher512 KB SRAM, 8 MB PSRAM, 8 MB FlashAnschlüsse2 × Micro-USB (UART-Brücke und native USB-OTG), 2 × 22-polige Stiftleisten, RGB-LEDVerbindungWLAN, Bluetooth, USBPreis22,94 €
- n. g.BBC micro:bit V2 Go – Einplatinencomputer im Starter-SetDatenProzessor—Arbeitsspeicher—Anschlüsse—VerbindungBluetooth, USBPreis37,95 €
- n. g.Raspberry Pi 3 Model B+ (1 GB) – EinplatinencomputerDatenProzessorBroadcom BCM2837B0, 4 × ARM Cortex-A53, 64 Bit, 1,4 GHzArbeitsspeicher1 GB LPDDR2; Massenspeicher über microSD-Karte (nicht enthalten)Anschlüsse4 × USB 2.0, HDMI, 3,5-mm-AV-Klinke, CSI-Kamera, DSI-Display, microSD-Slot, 40-Pin-GPIO, Ethernet, Micro-USB (Strom)VerbindungWLAN, Bluetooth, Ethernet / LAN, USBPreis49,94 €
Häufige Fragen
Passen UNO-R3-Shields auf den UNO R4 WiFi?
Ja, Formfaktor, Pins und 5-V-Logik sind kompatibel.
Was unterscheidet UNO R4 WiFi und Minima?
Der WiFi hat zusätzlich WLAN, Bluetooth und eine LED-Matrix.
Stimmt etwas nicht? Die Datenbank lebt von Hinweisen. Korrektur melden
Ähnliche Modelle

Controller & Einplatinenrechner · Daten aus dem Herstellerdatenblatt

Controller & Einplatinenrechner · Daten aus dem Herstellerdatenblatt

Controller & Einplatinenrechner · Daten aus dem Herstellerdatenblatt